MEDIAEDGE-CLEB Portable

Cloud-ready encoder

Model number: ME-CLEB-P3

SKU 4562393841104 Category

A space-saving dedicated encoder that supports live streaming distribution and local recording of high-quality video footage. It also supports the MEDIAEDGE cloud service and can be used for Internet distribution.

 

Supports live streaming and recording at the same time.
Supports automatic upload of recording files to FTP server or MMDS server.
Easy to use by turning on the power, just by performing the initial settings.
Stable live distribution is achieved through detailed initial settings and monitoring functions.
Can be set using a web browser.
You can view, upload, delete, and check detailed information of recorded files.
Supports multi-bitrate encoding required for live distribution.

Up to 2 streams of video can be distributed at the same time.

front panel

① Power button A button to start up and shut down.
②Reset button Used to reboot the system in an emergency.
Don’t use it normally.
③ System status lamp A lamp that indicates the status of the system.
Green: On: Booting, Off: Shut down.
Yellow: Displays the access status of the internal storage.
Red: Displays the warning status when the built-in fan stops.
④USB2.0 port Connect a USB-compatible keyboard or mouse.

rear panel

①Power terminal Connect the power cable.
②DisplayPort output Connect a display with a DisplayPort terminal and display the live encoder screen.
③HDMI output Connect to a display with an HDMI terminal and display the live encoder screen.
④DVI-D output Connect a display with a DVI-D terminal to display the live encoder screen.
⑤ LAN port Connect the LAN cable. On the Web console screen, the left port is recognized as “LAN-1” and the right port as “LAN-2”.
⑥USB3.0 port Connect a USB-compatible keyboard or mouse.
⑦ COM port we will not use it.
⑧ Line output we will not use it.
⑨Microphone input we will not use it.
⑩DVI-D input Connect the DVI cable.
⑪HDMI input Connect the HDMI cable.
⑫SDI input Connect the SDI cable.
⑬ Conversion cable connection terminal Connect the supplied analog component conversion cable.
⑭Y・Pb・Pr input Connect component cables. (Y: green, Pb: blue, Pr: red)
⑮ Audio input Connect RCA cables.

Technical specifications

input
picture DVI-D
HDMI (Type A, 19 pin)
SDI
Y/Pb/Pr (using the supplied analog component input cable)
1920×1080 59.94i/1920×1080 50i/1280×720 59.94p/
1280×720 50p/720×480 59.94i (excluding Y/Pb/Pr signals)/
720×576 50i (Y/Pb/Pr signals except)
audio Superimposed over HDMI/SDI
Analog RCA (using included analog component input cable)
48kHz Stereo 16bits
44.1kHz Stereo 16bits
32kHz Stereo 16bits
output
delivery RTMP
recording Recording on internal storage (MP4/FLV/MPEG-TS)
capacity approx. 400GB
Encoding specification
video H.264
Baseline, Main, High
up to 20Mbps
Up to 1920×1080
1, 5, 10, 15, 23.98, 24, 25, 29.97, 50, 59.94
audio AAC
Up to 512kbps
32kHz, 44.1kHz, 48kHz
Up to 2 channels
File MP4, Flash Video (flv), MPEG-TS

hardware specs

size
External size 328(W) × 220.9(D) × 88.7(H) mm *Not including protrusions
, height (H) increases by approximately 10mm when the included case mount bracket is attached.
mass about 4.5kg
Rating
Power-supply voltage 100V to 240V AC (50Hz/60Hz)
250W
temperature conditions 10 to 35°C *No condensation.
working posture horizontal

* Please note that specifications and appearance are subject to change without notice for improvement.

operating instructions

MEDIAEDGE-CLEB Portable Instruction Manual

Instruction manual/MEDIAEDGE
download

Delivery specification

MEDIAEDGE-CLEB Portable Delivery Specifications

Delivery specifications/MEDIAEDGE
download