This product is a device that relays the stream of a network camera compatible with the ONVIF standard
to reduce the network and connection load on the camera body when there are multiple viewing terminals.
In addition to each company’s network cameras, it also supports MEDIAEDGE Encoder K1000S / K1000H .
It is also possible to convert video from network cameras that do not support multicast to multicast and distribute it.
The broadcasted video can be viewed on MEDIAEDGE Decoder , USDP series, ME Live Viewer, etc.
Features of ME-IPTR3
Encoder and network camera video RTP stream can be relayed to decoder in full frame.
Network cameras from different manufacturers and MEDIAEDGE Encoder can be used together. (*For network cameras whose operation has been confirmed, see “Network cameras that can be relayed” below. )
Internet connection possible
Camera relay schedule is possible
Small housing for easy installation
Equipped with whitelist type security measures as standard
connection image
Network camera that can be relayed
A camera that meets the following conditions is required.
・ONVIF (Open Network Video Interface Forum) standard compatible
・H.264 compressed stream compatible
・RTP/RTSP protocol compatible
please note
Connection with all ONVIF compatible cameras is not guaranteed.
Receiving and relaying multicast streams of network cameras is not supported.
Even for network cameras that have already been operated, connection may not be possible due to F/W updates on the camera side.
1000Base-TX x 2 Conforms to Ethernet/IEEE802.3 frame format
2 x RJ45 modular connectors (only LAN2 is used for distribution)
Video output
digital output
HDMI Ver2.0 compliant x 4
HDMI Type-A
audio output
digital output
Superimposed output to HDMI
analog output
Unbalanced stereo audio output
3.5 inch stereo mini jack
general purpose input/output
Serial port
RS-232C
1 x RJ50 modular connector
USB port
USB 3.0 x 2
USB 2.0 x 1
USB Type A
Rating
Power-supply voltage
Input: AC 100V~240V (50Hz/60Hz)
Output: DC 12V 150W (max)
Input: DC 12V 5.0A (max)
Normal operation: 60W
temperature conditions
0 to 45°C
humidity conditions
10%~90%RH (no condensation)
Installation conditions
must be placed horizontally
External dimensions/mass
External dimensions
269(W) × 193(D) × 31.5(H) mm *Not including protrusions.
mass
About 2.1kg (excluding AC adapter)
delivery performance
Using MEDIAEDGE Encoder and network cameras made by Panasonic and SONY, we have confirmed that it is possible to deliver with the following combinations.
Input video (video bit rate and audio bit rate)
Number of inputs
Delivery method
number of deliveries
Video: 1Mbps, Sound: 128Kbps
Ten
UDP
300
Video: 2Mbps, Sound: 128Kbps
Ten
UDP
180 pieces
Video: 4Mbps, Sound: 128Kbps
Ten
UDP
90 pieces
Video: 8Mbps, Sound: 128Kbps
Ten
UDP
50
Video: 1Mbps, Sound: 128Kbps
Ten
TCP
450 bottles
Video: 2Mbps, Sound: 128Kbps
Ten
TCP
200
Video: 4Mbps, Sound: 128Kbps
Ten
TCP
100
Video: 8Mbps, Sound: 128Kbps
Ten
TCP
60
There are no restrictions on the number of network cameras that can be registered or the number of decoders that can be connected.
The number of connections that can actually be operated is also affected by the delivery protocol and network environment, so the above values are not necessarily guaranteed. Please check in the actual environment. .
Receiving and relaying multicast streams of network cameras is not supported.
