VPC-DX1

SDI/HDMI to ANALOG converter

SDI/HDMI to ANALOG converter Up/down conversion/frame rate conversion compatible model

Model number: VPC-DX1

SKU 4562393848240 Category

2 types of video input (3G/HD/SD-SDI/HDMI) and 7 types of video output (composite (CVBS)/S-Video/component (YCbCr)/HDMI/DVI-D/DVI-A/VGA) Yes, you can convert your video input to any output. It covers all typical analog video and digital video interfaces.
The unbalanced analog audio output level can be adjusted from -30dBu to 24dBu in 0.5dBu increments.
Input/output interface selection and output format selection are possible with the DIPSW on the main unit.
Other settings can be configured from a Windows PC using BoxCenter. (In DIPSW mode, it will start according to the DIPSW setting, and in USB mode, it will start according to the setting from BoxCenter)
Supports frame rate conversion (conversion from 59.94Hz to 60Hz, etc.).
HDMI audio output supports up to 8ch (LPCM). Since 1ch and 2ch are simultaneously output from the analog audio terminal, it is possible to monitor with a speaker or the like.
It supports battery drive. (Compatible adapters: V mount adapter, L mount adapter, power tap adapter)
RoHS compliant

Note)
Since the input and output clocks of this unit are asynchronous, in principle frames may be duplicated or lost. Ancillary data, etc. cannot be transmitted. Audio data is converted with a sampling rate converter. Also, a delay of up to 2 frames will occur.

video input format SD:
720×480 i59.94, i60/720×576 i50/
720×480 p59.94, p60/720×576 p50
HD:
1280×720 p59.94, p60, p50/1920×1080 i59.94, i60 , i50/
1920×1080 p23.98, p24, p25, p29.97, p30
3G:
1920×1080 p59.94, p60, p50
SD:
720×480 i59.94, i60/720×576 i50/
720×480 p59.94, p60/720×576 p50
HD:
1280×720 p59.94, p60, p50/1920×1080 i59.94, i60 , i50/
1920×1080 p23.98, p24, p25, p29.97, p30
3G:
1920×1080 p59.94, p60, p50
VESA:
1680×1050 p60/1600×1200 p60/1440×1050 p60/
1440× 900p60/1400x1050p60/1366x768p60/1280x1024p60/1280x960p60/
1280x800p60/
1280x720p60/1024x768p60/800x600p60/
640x480p60
video output format SD:
720×480 i59.94, i60/720×576 i50/
720×480 p59.94, p60/720×576 p50
HD:
1280×720 p59.94, p60, p50/
1920×1080 i59.94.i60 , i50/
1920×1080 p23.98, p24, p25, p29.97, p30
3G:
1920×1080 p59.94, p60, p50
1920×1080p60/1680×1050p60/1600×1200p60/
1440×1050p60/1440×900p60/1400×1050p60/
1366×768p60/1280×1024p60/1280×960p60/1280×
800p60 1280×720p60/1024×768p60/
800×600p60/640×480p60
SD:
720×480 i59.94/720×576 i50
HD:
1280×720 p59.94, p50/1920×1080 i59.94, i50/
1920×1080 p23.98, p24, p25, p29.97, p30
3G :
1920×1080 p59.94, p60, p50
SD:
720 x 480 i59.94 (setup level 0IRE/7.5IRE) /
720 x 576 i50
SDI input 3G-SDI (SMPTE 425M level A Direct image format mapping) Level A only /
HD-SDI (SMPTE 292M) / SD-SDI (SMPTE 259M)
HDMI input HDMI Ver.1.3a, HDCP not supported, CEC not supported
audio input SDI embedded audio (LPCM, Max.8ch, fs=48kHz)
HDMI embedded audio (LPCM, Max.8ch, fs=32kHz to 192kHz)
video output HDMI/DVI*1*2
DVI-A/VGA (Separated Sync)*2
Component (YCbCr) (1Vpp, 75Ω)
Composite (CVBS) (1Vpp, 75Ω, SetupLevel 0IRE/7.5IRE*3)
S-Video (1Vpp, 75Ω, SetupLevel 0IRE/7.5IRE *3) *4
SDI active through output
audio output HDMI embedded audio (LPCM, Max.8ch, fs=32kHz to 192kHz <input through>)
Analog LR audio (unbalanced, -30dBu to 24dBu switching*5, load resistance 10kΩ or more)
input terminal HDMI Type A x 1 / SDI x 1
output terminal DVI-I x 1 (for HDMI/DVI-D/DVI-A/VGA) *6
BNC x 3 (for component, composite, and S-Video)
BNC x 1 (SDI active through output)
DIP switch ON: UP / OFF: DOWN
USB connector USB Type A mini x 1
LED SDI/HDMI/OUT (HDMI/DVI, VGA/DVI-A, YPbPr, CVBS/S-Video)
Case SECC/HDMI retaining cable clamp included
External size 153 (W) × 63.6 (D) × 26 (H) mm *Excluding protrusions
mass 330g
power supply AC adapter: AC100-240V/DC12V
Maximum power consumption 6.01W
temperature conditions Operating temperature range: 0 to 50°C, 20 to 80%RH *No condensation
Storage temperature range -20 to +60°C

*1 Uses DVI-HDMI conversion connector
*2 Exclusive specification for dual use with DVI connector
*3 Setuplevel can be changed with BoxCenter (default 0IRE)
*4 Uses BNCx2-S terminal conversion
*5 Switches with BoxCetner (default +4dBu) , Also with level adjustment function in increments of 0.5 dBu
*6 Simultaneous output with BNC output terminal is not possible during DVI-A/VGA output.

front panel

①SDI input terminal Inputs 3G/HD/SD-SDI signals
②SDI through output terminal Active through the signal to the SDI input terminal
③HDMI input terminal Connect an HDMI source device such as an HDMI output camera
④ LEDs Display the status of the main body
⑤ DIP switch Make settings for the main unit
⑥ Power connector Connect the included AC adapter

rear panel

①Stereo minijack output Unbalanced analog audio output connector
②YCbCr/CVBS/S-Video output terminal Component/composite/S-Video output terminal
③DVI-I output terminal HDMI (using HDMI-DVI conversion connector) / DVI-D / DVI-A / VGA (using DVI-VGA conversion connector) output terminal

side panel

①USB connector Used for firmware update
VACADP2
model number
VACADP2

operating instructions

VPC-DX1 User’s Manual

Instruction Manual/Video Pro
download

driver etc.

VPC-DX1 Firmware

Driver etc./VideoPro
download

Box Center (for all series)

Driver etc./VideoPro
download

Box Center (Supports VideoPro2 series)

Driver etc./VideoPro
download

Delivery specification

VPC-DX1 delivery specification

Delivery specification/VideoPro
download

Dimensions

VPC-DX1 external dimensions

Dimensions/VideoPro
download