Signals input to the SDI connector are output to the HDMI connector.
It has various conversion functions such as resolution up / down / frame rate / aspect.
SD-SDI, HD-SDI, 3G-SDILevelA and 3G-SDILevelB signals can be input.
Basic settings such as resolution can be set with DIP switches.
The signal input to the SDI terminal can be divided into two and output. (not converted)
Supports USB power supply.
Supports dual power supply with AC adapter and USB power supply.
Detachable mounting bracket.
RoHS compliant
* HDCP (copyright protected) signals cannot be input.
*For advanced settings and firmware updates, a micro USB cable and a PC with Windows must be prepared separately. Also, please note that it is different from the mini USB terminal of the conventional model.
VPC-SH3 is the successor model of VPC-SH2.
| Supported formats for SDI input |
SD-SDI: 720x480i59.94, 720x576i50,
HD-SDI: 1280x720p59.94/p60/p50,
1920x1080i59.94/i60/i50,
1920x1080p23.98/p24/p25/p29.97/p30,
A: 3G-SDI Level 1920x1080p59.94/p60/p50
3G-SDI Level B-DL : 1920x1080p59.94/p60/p5
3G-SDI Level B-DS : 1280x720p59.94/p60/p50
1920x1080i59.94/i60/i50,
1920x1080i59.94 /i60/i50, 1920x1080p23980 /p25/p29.97/p30,
*3G-SDI Level B-DS stream selection is set in BoxCenter |
| HDMI output format |
SD: 720x480i59.94, 720X576I50,
720x480P59.94/P60, 720X576P50,
HD: 1280x720P59.94/P60/ P50
, 1920X1080I59.94/I50/I50/I50, 1920X1080P23/P23/P23/P23/P23/P23/P23/P23/P23/P24.98
/ I
1920x1080p59.94/p60/p501680x1050P60, 1400x1200P60, 1440x1050P60,
1440x900P60 ,1400x1050P60 ,13668P60,
1280x1024P60, 1280x960P60
, 1280P60,
1280X80060 |
| Formats compatible with Pass Through mode |
SD: 720x480i59.94, 720x576i50,
HD: 1280x720p59.94/p60/p50,
1920x1080i59.94/i60/i50,
1920x1080p23.98/p24/p25/p29.97/p30, 3G2x190/p594
Level A: 190×190 p50
3G Level B-DL : 1920x1080p59.94/p60/p50
*The scaler is bypassed in Pass Through mode
*OSD display is not supported
*Maximum delay is 2 lines
*3G-SDI Level B-DS does not support PassThrough It is compatible |
| SDI input |
3G-SDI Level A Direct image format mapping (SMPTE 425M)
3G-SDI Level B-DL SMPTE ST372 Dual Link mapping, (SMPTE 425M)
3G-SDI Level B-DS 2xSMPTE ST292-1(HD-SDI) dual-stream mapping
(SMPTE 425M)
HD-SDI (SMPTE 292M)
SD-SDI (SMPTE 259M) |
| SDI through output |
Active Thru (Equalizer/Reclock always enabled) |
| HDMI output |
HDMI Ver.1.3a, HDCP not supported, CEC not supported, DeepColor not supported, color space
RGB/YCbCr444/YCbCr422 switchable |
| audio input |
SDI embedded audio (LPCM Max.8ch, 48kHz) |
| I/O delay |
Scaler mode: up to 2 frames.
Pass Through mode: 2 lines maximum |
| Recommended SDI cable |
・For RG6 (equivalent to 5CFB) 75Ω,
3G: max. 100m / HD: max. 170m / SD: max. 400m
・For RG59 (3C2V equivalent) 75Ω, 3G: max. 86m
/ HD: max. 120m / SD: max .
L-5CFB, RG59: Measured with Belden 9275
*The maximum cable length varies greatly depending on the device used and the performance and quality of the cable. |
| input terminal |
SDI (75Ω BNC) x 1 |
| output terminal |
HDMI Type A x 1
SDI LOOP THRU (Active Through Output) (75Ω BNC) x 2 |
| USB connector |
USB Micro-B x 1 |
| DIP switch |
8bit (Control/Audio Mute/Video Format/Frame rate) |
| Case |
SECC |
| External size |
63.6 (W) x 103.6 (D) x 22.5 (H) mm (including bracket) |
| mass |
209g |
| Power supply (AC adapter power supply) |
AC adapter: AC100-240V / DC12V max 230mA |
| Power supply (USB power supply) |
USB bus power +5V Max 480mA |
| Maximum power consumption |
3.27W (including AC adapter) |
| temperature conditions |
Operating temperature range: 0 to 50°C, 20 to 80% RH *No condensation |
| storage temperature |
-20 to +60°C |
* AC adapter power supply is prioritized for power supply.
