The signal input to the SDI terminal is output from the HDMI terminal at the same resolution. (There is no conversion function such as resolution)
SD-SDI, HD-SDI, 3G-SDILevelA and 3G-SDILevelB signals can be input.
The signal input to the SDI terminal can be divided into two and output. (not converted)
Supports USB power supply.
Supports dual power supply with AC adapter and USB power supply.
The mounting bracket is now detachable.
* HDCP (copyright protected) signals cannot be input.
*For advanced settings and firmware updates, a micro USB cable and a PC with Windows must be prepared separately.
Also, please note that it is different from the mini USB terminal of the conventional model.
VPC-SH3STD is the successor model of VPC-SH2STD.
3G-SDI Level A Direct image format mapping (SMPTE 425M)
3G-SDI Level B-DL SMPTE ST372 Dual Link mapping (SMPTE 425M)
HD-SDI (SMPTE 292M)
SD-SDI (SMPTE 259M)
SDI through output
Active Thru (Equalizer/Reclock always enabled)
Supported formats for SDI input
SD-SDI: 720x480i59.94, 720x576i50, HD
-SDI: 1280x720p59.94/p60/p50, 1920x1080i59.94/i60/i50,
3G-SDI Level B-DL: 1920x1080p59.94/p60/p50
*3G-SDI Level B-DS is not supported
・For RG6 (equivalent to 5CFB) 75Ω,
3G: max. 100m / HD: max. 170m / SD: max. 400m
・For RG59 (3C2V equivalent) 75Ω, 3G: max. 86m
/ HD: max. 120m / SD: max .
L-5CFB, RG59: Measured with Belden 9275
*The maximum cable length varies greatly depending on the device used and the performance and quality of the cable.
SDI (75Ω BNC) x 1
HDMI Type A x 1
SDI LOOP THRU (Active Through Output) (75Ω BNC) x 2
USB Micro-B x 1
TYPE A [19-pin female]
63.6 (W) x 103.6 (D) x 22.5 (H) mm (including bracket)
Power supply (AC adapter power supply)
AC adapter: AC100-240V / DC12V max 160mA
Power supply (USB power supply)
USB bus power +5V max 330mA
2.27W (including AC adapter)
Operating temperature range: 0 to 50°C *No condensation
-20 to +60°C
* AC adapter power supply is prioritized for power supply.
①SDI pass-through output connector
Active pass-through output for SDI input.
②HDMI output connector
Converted HDMI signal is output.
③Screw hole for HDMI cable clamp
Attach the supplied cable clamp to prevent the HDMI cable from coming off.
Connect the included AC adapter.
②Micro-B USB connector
It is used for firmware upgrade and device setting by connecting to a PC. In addition, power can be supplied by USB 5V bus power.
Displays the device/input signal status.
④SDI input connector
Input the SDI signal to be converted.
⑤Screw hole for USB cable clamp
Attach the included cable clamp to prevent the USB cable from coming off.
(1) Chassis bracket
It is a bracket metal fitting for housing fixing, and it can be removed.
22,000 yen (tax included)
●VPC-SH3STD main unit x1 ●Instruction manual x1 ●Dedicated AC adapter (Japanese specification) x1 ●Bracket x2 (included with main unit) ●Cable clamp x2 (for HDMI and USB cables)
How to extend an SDI cable using VideoPro:
With HDMI, the standard cable length can only be extended up to 5m.
It is possible to extend by using special equipment, but if you use VideoPro to convert from HDMI to SDI, you can extend the cable with a cheap coaxial cable.