HDMI input |
HDMI Ver. 2.0b, HDCP not supported, CEC not supported, DeepColor supported, color space RGB/ YCbCr444/ YCbCr422 supported, static HDR supported |
SDI output |
12G-SDI (SMPTE ST2082-1/ST2082-10)
6G-SDI (SMPTE ST2081-10)
3G-SDI Level A Direct image format mapping (SMPTE 425M)
3G-SDI Level B-DL SMPTE ST372 Dual Link mapping (SMPTE 425M )
HD-SDI (SMPTE 292M)
*SD-SDI not supported |
HDMI output |
HDMI2.0 input pass-through output |
HDR |
・Contents display of HDMI input Dynamic Range and Mastering InfoFrame
・Information of HDMI2.0 input Dynamic Range and Mastering InfoFrame is reflected in 12G-SDI payload
*HDR format mapping conversion is not supported (LUT adaptation is not supported) |
audio input |
HDMI embedded audio (LPCM, Max.8ch, sampling frequency 32kHz to 192kHz
*resampled to 48kHz) |
audio output |
SDI embedded audio (LPCM Max.8ch, 48kHz)
*Channel remapping and downmix output not supported |
I/O delay |
2 lines max. |
Recommended maximum SDI cable length |
12G-SDI (L-5.5CUHD) pathological
signal: 70m / color bar signal: 80m
*For L-5CFB (pathological/color bar signal): 60m
6G-SDI (L-5.5CUHD) pathological
signal: 90m / Color bar signal: 100m
3G-SDI (L-5CFB) pathological
signal: 150m / Color bar signal:
170m HD-SDI (L-5CFB) pathological
signal: 220m / Color bar signal: 250m
*Cable used for measurement , 12G-SD compatible L-5.5CUHD/CANARE, and 3G/HD-SDI compatible L-5CFB/CANARE are used
. Based on the result of connecting to and verifying. (Long setting)
* Pathological (check field) signals are test signals for evaluating analog performance and PLL.
*The maximum cable length varies greatly depending on the device used and the performance and quality of the cable, so please check with the actual device. |
Verified HDMI Cable (5m) |
RP-CHK50 / Panasonic, HDMI05P / CANARE, UHP-5 / IMAGENICS |
input terminal |
HDMI Type A x 1 |
output terminal |
12G-SDI compatible 75Ω BNC x 2
HDMI Type A x 1 (HDMI input pass-through output) |
USB connector |
USB Type-C x 1 (USB power supply not supported) |
DIP switch |
10bit (Control / 4K to FHD / Out 1 Cable Length / Out 2 Cable Length / Reserved) |
FAN |
1 unit (replaceable) |
Case |
SECC |
RoHS/RoHS2 |
correspondence |
Size |
W: 210mm x D: 76mm x H: 36mm (Including bracket, excluding connector, bracket cannot be attached/detached) |
weight |
412g |
Power supply (AC adapter power supply) |
AC adapter: AC100-240V / DC12V Max 748mA |
Power supply (USB power supply) |
incompatible |
Maximum power consumption |
11.0W (including AC adapter) |
Operating temperature and humidity range |
0 to 40°C, 20 to 80% RH *No condensation |
Storage temperature and humidity range |
-20 to 60°C, 5 to 90% RH *No condensation |
HDMI input format |
[HD]
1280x720p59.94/p60/p50
[FHD]
1920x1080i59.94/i60/i50,
1920x1080p23.98/p24/p25/p29.97/p30,
1920x1080p59.94/p60/p50
[4K]
4096p296/p2.14 /p25/p29.97/p30,
4096x2160p59.94/p60/p50 3840x2160p23.98
/p24/p25/p29.97/p30 3840x2160p59.94/
p60/p50
*SD format not supported |
SD output format (resolution and frame rate depend on HDMI input) |
HD-SDI: 1280x720p59.94/p60/p50,
1920x1080i59.94/i60/i50,
1920x1080p23.98/p24/p25/p29.97/p30,
3G-SDI Level A: 1920x1080p59.94/p60/p50
3G-SDI Level B-DL: 1920x1080p59.94/p60/p50
6G-SDI: 4096x2160p23.98/p24/p25/p29.97/p30 3840x2160p23.98/
p24/p25/p29.97/p30
12G-SDI: 4096x2160p59.94 p60/p50
3840x2160p59.94/p60/p50
*SD-SDI not supported |
simple down conversion |
Down-conversion function from HDMI (4K input) to 3G-SDI (FHD)
*Supported resolution: Conversion from 3840×2160 to 1920×1080
*Supported frame rate: p60/p59.94/p50/p30/p29.97/p25/p24/ p23.98
*This is a simple down-conversion that outputs 4K input as FHD. There is no frame rate conversion function. |