・With a 12G-SDI compatible L-5.5CUHD equivalent cable, it is possible to extend 70m for pathological signals and 80m for color bar signals. ・L-5CFB used for 3G/HD-SDI has been verified up to 60m with pathological/color bar signals.
Supports various SDI signals
・Reclock and extend 12G-SDI/6G-SDI/3G-SDI/HD-SDI/SD-SDI/DVB-ASI signals. (Reclocking is always enabled)-Since it has one port for input and output, it is a compact product that is not affected by noise between ports.
Hirose Electric’s BNC75 series 12G-SDI compatible receptacle is used for the BNC connector.
Detect input lock condition
・The lock status to the input signal is indicated by an LED.
12V AC adapter power supply
・Stable power supply with screw-on AC adapter (USB power supply is not supported)
12G-SDI (L-5.5CUHD) pathological signal: 70m / color bar signal: 80m *For L-5CFB (pathological/color bar signal): 60m 6G-SDI (L-5.5CUHD) pathological signal: 90m / Color bar signal: 100m 3G-SDI (L-5CFB) pathological signal: 150m / Color bar signal: 170m HD-SDI (L-5CFB) pathological signal: 220m / Color bar signal: 250m SD-SDI / DVB- ASI (L – 5CFB) pathological signal: 400m / color bar signal: 450m Use *Based on the results of verification by connecting our products with a long cable and connecting the front and back to a signal generator and measuring instrument with a 1m cable. (Long setting) * Pathological (check field) signals are test signals for evaluating analog performance and PLL. *The maximum cable length varies greatly depending on the device used and the performance and quality of the cable, so please check with the actual device.
input terminal
SDI (75Ω 12G-SDI compatible BNC connector) x 1
output terminal
SDI (75Ω 12G-SDI compatible BNC connector) x 1
USB connector
USB Mini-B x 1
Case
SECC
RoHS/RoHS2
correspondence
Size
W: 70mm x D: 63.6mm x 26mm (not including connector, including bracket, not detachable)
Connect to a device with an SDI input terminal such as a display.
②Status LED
Displays the power ON status and SDI input signal lock status.
rear panel
①SDI input
Connect a device with an SDI output terminal such as a camera.
② Power jack
Connect the included AC adapter.
side panel
①USB Mini-B
It is used for firmware upgrade and device setting by connecting to a PC.
Windows utility software for VideoPro 4K series. VPUS-SR1 and VPUS-SS1 are connected to a Windows PC with a USB Mini-B cable. Since it is recognized as an HID device, it can be used without installing a driver, just like the conventional BoxCenter. Please connect only one unit. Note: VPUS-SR1 and VPUS-SS1 cannot detect the resolution and frame rate of the input format on BoxCenter Pro due to the characteristics of the device used, 12G-SDI, 3G-SDI, HD-SDI, SD- It is detected in the form of SDI.
*In the case of the conventional product VPS-SR2, it was possible to display the input resolution and frame rate, but this product only supports format display such as 12G/6G/3G/HD/SD.
*1 It depends on the performance of the connected device, so we recommend checking the connection with a demo machine in advance.
VideoPro 4K model
VideoPro 3 series
USB
USB Type-C (VPUC series) USB Mini-B (extender, distributor)
USB Micro-B *The extender has no USB connector
USB power supply
incompatible
correspondence
Detachable housing flange
incompatible
correspondence
Scaler framebuffer function
Not supported (with simple down converter)
Compatible models available
FAN
Equipped (VPUC series only) * Fan can be replaced from the side of the main unit, and a maintenance fan module is sold (VPOP-FANA)
