Encode the input video image to H.264 format in real time. An encoder that can stream to a network. It functions as a stream server by itself, and you can easily build a live distribution system by combining it with a client terminal such as MEDIAEDGE Decoder . It is also possible to operate as part of a video distribution system by linking with the MEDIAEDGE server (MEDIAEDGE-SVS4).
H.264 high-definition video distribution
Video input via the HDMI terminal or composite can be encoded in real time to the H.264 format and streamed.
Supports low latency mode
In low latency mode, the delay time between LEB Pro2 and MEDIAEDGE Decoder is approximately 0.5 seconds.
Low-latency mode and normal mode can be switched using the Web Console settings.
In low-delay mode, there are restrictions on operation, such as only MPEG-1 Audio Layer2 for audio and only MEDIAEDGE Decoder for compatible devices .
IPv4 and IPv6 addresses
Supports IPv4 and IPv6 addresses.
FEC function
With the FEC (Forward Error Correction) function, it is possible to correct errors when data is missing or incorrect during distribution.
Web server function
Uses HTML menus to provide content menus for each terminal.
By combining with MEDIAEDGE Decoder , etc., you can build a live distribution system without using MEDIAEDGE-SVS4. In addition, it is possible to perform device settings, status monitoring, and firmware updates from a web browser.
Remote serial function
In combination with MEDIAEDGE Decoder , etc., the signal input to the serial port of the terminal can be output from the serial port via the network, and the signal input from the serial port can be output from the serial port of the terminal such as MEDIAEDGE Decoder .
WOL
Supports WOL (Wake On LAN). It is possible to start the device from the standby state via the network.
LEB SDK
It comes with an SDK for developing software that can configure and search for devices, and capture video and still images. *Playback terminal software ” MEDIAEDGESWT4 ” is required to
capture videos and still images . *Please use low-delay encoding with “disabled”.
MEDIAEDGE Finder
It comes with a convenient tool software that detects MEDIAEDGE products using UPnP. Using this tool makes it easy to find network-connected MEDIAEDGE devices without specifying their IP addresses, so you can easily set up devices even if you do not know their IP addresses.
2 types of distribution modes (on-demand / start-up distribution)
In response to a viewing request from a terminal, you can select from two types of distribution modes according to your application: “on-demand distribution mode” that distributes live on demand, and “automatic distribution mode” that starts multicast distribution immediately after startup. .
For on-demand delivery mode, you can select either unicast or multicast. In addition, in automatic distribution mode, distribution can be started to a specific multicast group that has been set in advance after the power is turned on.
Multiple unicast delivery
Up to 16 unicast broadcasts can be performed at the same time on terminals such as MEDIAEDGE Decoder . The maximum number of distributions depends on the bitrate.
OSD function
The date, time, title, etc. can be superimposed on the input video.
Bandwidth control
You can set the communication speed and data transfer volume according to the usage status of the distributed stream.
Comparison with LEB Express2
| LEB Pro2 | Express2 | |
|---|---|---|
| Supports low latency | ◯ | ◯ |
| analog audio input | ◯ | ◯ |
| SDI input | ◯ | – |
| Unicast number | 16 | 1 |
| Supports multicast | ◯ | – |
| Bandwidth control | ◯ | – |
| OSD indicates | ◯ | – |
